ACCESSORIES
eFuel DOME
Sets a new standard in fuel level detection with its wireless, autonomous design. It offers a perfect installation with no drilling or wiring. Using a standard short-range, low-power wireless communication protocol, eFuel DOME establishes a seamless connection with StarLink telematics devices. Equipped with a replaceable internal battery and latest-generation power-saving technology, eFuel DOME ensures uninterrupted operation over a long period, even when the engine is off. The combination of quick installation, the ability to measure and warn about changes in fuel levels regardless of the ignition state, plus a complete automatic calibration process, makes eFuel DOME the optimal solution for fuel control. Real-time data analysis. No drilling or wiring required. Fuel-theft alert. Automatic calibration. Suitable for a wide variety of vehicles. Black Box (before and after a fuel-theft event).
eFuel DOME
Sets a new standard in fuel level detection with its wireless, autonomous design. It offers a perfect installation with no drilling or wiring. Using a standard short-range, low-power wireless communication protocol, eFuel DOME establishes a seamless connection with StarLink telematics devices. Equipped with a replaceable internal battery and latest-generation power-saving technology, eFuel DOME ensures uninterrupted operation over a long period, even when the engine is off. The combination of quick installation, the ability to measure and warn about changes in fuel levels regardless of the ignition state, plus a complete automatic calibration process, makes eFuel DOME the optimal solution for fuel control. Real-time data analysis. No drilling or wiring required. Fuel-theft alert. Automatic calibration. Suitable for a wide variety of vehicles. Black Box (before and after a fuel-theft event).
Bluetooth
12-24VDC
Up to 80 C°
Water Resistant
60 mm X 25mm
eFuel
eFuel is an analog fuel level/consumption solution, equipped with patented technology to measure and provide real-time fuel events during ignition on and off, with fully automatic control. It uses the vehicle’s original fuel float mechanism already installed and does not need or include any additional sensor. Using ERM’s patented eNet communication protocol, eFuel sends alerts and data about the fuel level, refueling and fuel-theft events through the StarLink tracking device, combining fuel-reading capabilities and alerts even when the ignition is off, fully automatically. The calibration process makes eFuel a perfect solution for fuel management and theft prevention.
eFuel
eFuel is an analog fuel level/consumption solution, equipped with patented technology to measure and provide real-time fuel events during ignition on and off, with fully automatic control. It uses the vehicle’s original fuel float mechanism already installed and does not need or include any additional sensor. Using ERM’s patented eNet communication protocol, eFuel sends alerts and data about the fuel level, refueling and fuel-theft events through the StarLink tracking device, combining fuel-reading capabilities and alerts even when the ignition is off, fully automatically. The calibration process makes eFuel a perfect solution for fuel management and theft prevention.
12-24VDC
Voltage Levels 0-30VDC
3cm X3cm X3cm
eData
It is the most complete tool available to intelligently analyze vehicle operation and diagnostics. Using simple human-language formulas, eData’s rules engine can alert on any combination of parameter values being emitted through ERM’s wide range of CANBUS or OBD CAN accessories. This means that even if you have never analyzed vehicle operation, you can easily set up the system and get useful information immediately.
eData
It is the most complete tool available to intelligently analyze vehicle operation and diagnostics. Using simple human-language formulas, eData’s rules engine can alert on any combination of parameter values being emitted through ERM’s wide range of CANBUS or OBD CAN accessories. This means that even if you have never analyzed vehicle operation, you can easily set up the system and get useful information immediately.
Easy connectivity with OBD CAN
Standard vehicle extraction and analysis
CANBUS parameters
Extraction and analysis of additional vehicle data
Using a non-intrusive CANBUS reader (with MagiCAN)
eFlash
eFlash is an advanced multifunctional tool that enables both visual driver alerts and keypad functions at the same time. eFlash can be used as a visual/audible driver-alert solution for events such as dangerous maneuvers and driver behavior, vehicle diagnostic alarms or proximity alerts; it stores different locations to alert the driver when approaching them. When used as an add-on to the ERM StarLink telematics solution, all eFlash events can be transmitted in real time to the server for additional analysis and reporting. eFlash can also act as a report or driver-alert enabler, for example offering a panic button or roadside-assistance keys. The eFlash icon set can be customized on demand, and its keys can be configured for specific purposes and multiple activities, such as:
eFlash
eFlash is an advanced multifunctional tool that enables both visual driver alerts and keypad functions at the same time. eFlash can be used as a visual/audible driver-alert solution for events such as dangerous maneuvers and driver behavior, vehicle diagnostic alarms or proximity alerts; it stores different locations to alert the driver when approaching them. When used as an add-on to the ERM StarLink telematics solution, all eFlash events can be transmitted in real time to the server for additional analysis and reporting. eFlash can also act as a report or driver-alert enabler, for example offering a panic button or roadside-assistance keys. The eFlash icon set can be customized on demand, and its keys can be configured for specific purposes and multiple activities, such as:
Input key: ID, panic, situation report
Visual driver alert: multicolor LED alert with icon.
Audible driver alert: the buzzer can be preconfigured according to the required events
ePoly
ePoly is a vehicle proximity-alert solution, capable of storing and managing a large number of different locations to alert the driver when approaching them. For example: speed cameras, dangerous intersections, speed bumps, customer locations, worksite locations, supplier locations, etc. Once you approach or reach a predefined location, a set of audible alerts sounds to notify the driver. When used as an add-on to the ERM StarLink telematics solution, all ePoly events can be transmitted in real time to the server for additional analysis and reporting.
ePoly
ePoly is a vehicle proximity-alert solution, capable of storing and managing a large number of different locations to alert the driver when approaching them. For example: speed cameras, dangerous intersections, speed bumps, customer locations, worksite locations, supplier locations, etc. Once you approach or reach a predefined location, a set of audible alerts sounds to notify the driver. When used as an add-on to the ERM StarLink telematics solution, all ePoly events can be transmitted in real time to the server for additional analysis and reporting.
12-24VDC
Supports up to 40,000 predefined locations. Latitude/longitude, heading, speed
Alert settings, buzzer frequency
Firmware update, parameter update, location upload
eVoice
eVoice can play prerecorded audible alerts triggered for different predefined situations, based on a wide variety of ERM solutions to alert the driver. Alerts can be configured, for example, for driving behavior or other safety violations, vehicle diagnostic events, and location events such as entering a specific perimeter or approaching a hazardous road, etc. eVoice lets the fleet manager or service operator prerecord up to 100 audible warnings or use text-to-speech in the driver’s native language, according to the desired alert set. Easy-to-use software is provided so the administrator can easily manage all alerts and create rules to match alerts with events.
eVoice
eVoice can play prerecorded audible alerts triggered for different predefined situations, based on a wide variety of ERM solutions to alert the driver. Alerts can be configured, for example, for driving behavior or other safety violations, vehicle diagnostic events, and location events such as entering a specific perimeter or approaching a hazardous road, etc. eVoice lets the fleet manager or service operator prerecord up to 100 audible warnings or use text-to-speech in the driver’s native language, according to the desired alert set. Easy-to-use software is provided so the administrator can easily manage all alerts and create rules to match alerts with events.
Harsh Turn Alerts
Speeding Alerts
Sounds for incorrect behaviors
SMART MS
SMART MS is a compact short-range wireless multisensor used to monitor the environmental conditions of mobile and stationary assets/goods in various IoT and asset-monitoring applications. SMART MS monitors multiple environmental parameters such as temperature, humidity, movement, tilt/fall, magnetic switch and light (for door open/close). The values measured by SMART MS are transmitted to a cloud server through a dedicated gateway, such as any of the StarLink telematics devices with the iRF or iRF HUB variant. Being small and portable, SMART MS is suitable for use in logistics, cargo monitoring and many other asset-monitoring and IoT applications.
SMART MS
SMART MS is a compact short-range wireless multisensor used to monitor the environmental conditions of mobile and stationary assets/goods in various IoT and asset-monitoring applications. SMART MS monitors multiple environmental parameters such as temperature, humidity, movement, tilt/fall, magnetic switch and light (for door open/close). The values measured by SMART MS are transmitted to a cloud server through a dedicated gateway, such as any of the StarLink telematics devices with the iRF or iRF HUB variant. Being small and portable, SMART MS is suitable for use in logistics, cargo monitoring and many other asset-monitoring and IoT applications.
3.6VDC - Replaceable 600mAh battery
Standard low-power, short-range wireless communication, 2.4 GHz, v4.2
4.5cm x 4.5cm x 1.3cm
Keypad 5 / 10 Digits
The 5/10-digit keypads are designed to allow control over different applications such as: Driver Identification, Immobilizer, Panic Button, Trip-type configuration and Speed Dialing.
IP67 10-digit keypad
IP67 touch-platform accessory. Uses ERM’s eNet3 protocol. For indoor use or in open sites.
5-digit keypad
5-key keypad accessory for panel installation. Uses ERM’s eNet2/eNet3 protocols. Both keypads are equipped with LED and sound alerts. Up to 500 different codes for driver identification. Option to preconfigure 3 different trip types (Work, Private, etc.). Option to configure up to 5 different phone numbers for speed dialing (when combined with StarLink Voice). Custom button options.
Keypad 5 / 10 Digits
The 5/10-digit keypads are designed to allow control over different applications such as: Driver Identification, Immobilizer, Panic Button, Trip-type configuration and Speed Dialing.
IP67 10-digit keypad
IP67 touch-platform accessory. Uses ERM’s eNet3 protocol. For indoor use or in open sites.
5-digit keypad
5-key keypad accessory for panel installation. Uses ERM’s eNet2/eNet3 protocols. Both keypads are equipped with LED and sound alerts. Up to 500 different codes for driver identification. Option to preconfigure 3 different trip types (Work, Private, etc.). Option to configure up to 5 different phone numbers for speed dialing (when combined with StarLink Voice). Custom button options.
Dallas Kit (reader and keys)
Dallas keys are coded keys used for driver identification and immobilization, read through the Dallas reader and connected to the 1-Wire interface of the Cellocator unit. Additional keys enable multiple drivers.
Dallas Kit (reader and keys)
Dallas keys are coded keys used for driver identification and immobilization, read through the Dallas reader and connected to the 1-Wire interface of the Cellocator unit. Additional keys enable multiple drivers.
1-Wire Temperature Sensor
The 1-Wire temperature sensor can be connected to the 1-Wire port of the Cellocator unit to provide a low-cost, easy-to-install solution for the cold-chain transport market. Operating temperature range: -55°C to +125°C.
1-Wire Temperature Sensor
The 1-Wire temperature sensor can be connected to the 1-Wire port of the Cellocator unit to provide a low-cost, easy-to-install solution for the cold-chain transport market. Operating temperature range: -55°C to +125°C.